Rooftop, in-roof and ground-mounted solar for the western Wolds and the Vale of York edge

Solar Panels in Pocklington and Market Weighton

Pocklington and Market Weighton sit where the Yorkshire Wolds drop down to the Vale of York, and many properties here have land as well as roofs. We’ve installed a ground-mounted system at Wapplington, just outside Pocklington, and an in-roof system with battery storage at North Newbald, 4 miles from Market Weighton. We’re based in Beverley, 13 miles from Market Weighton, and we prepare and manage the Northern Powergrid G99 application for you.

See if we cover your area
Delivered For
Boeing Integra Indurent RAF NHS Modulek Biffa Fire Service Boeing Integra Indurent RAF NHS Modulek Biffa Fire Service

CHAS Elite accredited · MCS certified · RECC member

Pocklington and Market Weighton sit where the Yorkshire Wolds drop down to the Vale of York, and many properties around them have something town homes don’t: land. That makes this one of the best parts of the East Riding for ground-mounted solar, alongside barn conversions, farm buildings, new-build homes and the units on Pocklington’s industrial estate and business park. BrightEdge Solar has installed a ground-mounted system at Wapplington, just outside Pocklington, and an in-roof system with battery storage at North Newbald, 4 miles from Market Weighton. We’re based in Beverley, 13 miles from Market Weighton.

Book a free survey · Call 01482 765063

Ground-mounted solar: our Wapplington install

For a barn conversion at Wapplington, near Pocklington, we installed a 29 kWp ground-mounted array of all-black Hyundai panels with 30 kW of inverter capacity and a purpose-built plant room. We used ballasted ground mounts, which need no piling or concrete foundations. They’re positioned on the ground and weighted, so they go in quickly, disturb the land very little, and can be moved or extended later.

A ground mount makes sense when: – your roofs face the wrong way, are shaded, or aren’t strong enough – you have a paddock or field corner you aren’t using – you want the panels angled for the best yield rather than following a roof pitch – you’d rather keep a listed or character roof clear

Ground-mounted arrays don’t have the same permitted development rights as roof panels, so we check planning for your site first. Read the Wapplington case study.

Solar for homes and new builds

  • In-roof systems for new builds and re-roofs. At North Newbald we fitted a 9 kWp in-roof system with an 11.5 kWh battery on a new-build home. In-roof panels are set into the roof instead of tiles, so they sit flush. If you’re building or re-roofing, it’s the best time to do it.
  • Barn conversions. Converted barns often have long, unshaded roof slopes, or land for a ground mount, as at Wapplington.
  • Batteries. A battery carries daytime generation into the evening. We size it from your usage.
  • 0% VAT on solar panels and batteries for homes until 31 March 2027.

See home solar panels and battery storage.

Farms and rural businesses

Arable and livestock farms around Pocklington, Market Weighton and Holme-on-Spalding-Moor have the same draws as farms across the Wolds: big sheds, daytime loads and low export prices. Nine miles north-east of Pocklington, at North Dalton, we fitted 19.8 kWp to a split corrugated and asbestos farm roof with an EV charger for holiday lets. More on farm solar panels.

Businesses in Pocklington and Market Weighton

Pocklington Industrial Estate and Pocklington Business Park, on the edge of the town, have workshops, light-industrial and warehouse units with engineering, agricultural, recycling and trade businesses. Market Weighton has smaller workshops and offices. Owner-occupied units with daytime loads tend to see the fastest payback, because most of the power is used on site. See commercial solar in East Yorkshire and commercial battery storage.

Areas we cover

  • Pocklington (YO42) and nearby villages: Barmby Moor, Wilberfoss, Melbourne, Nunburnholme, Millington, Wapplington
  • Market Weighton (YO43) and the villages around it: Shiptonthorpe, Holme-on-Spalding-Moor, Sancton, North Newbald, South Cave edge
  • The A1079 corridor towards Stamford Bridge and York (see commercial solar in York and North Yorkshire)
  • Next door: Driffield and the Wolds, Beverley

These are areas we cover, not a list of past installs.

Planning: conservation areas and ground mounts

Pocklington town centre is a designated conservation area. Inside it, panels on a road-facing roof may need permission, and listed buildings need listed building consent. Ground-mounted arrays have their own size and siting limits under permitted development, and larger arrays need planning permission. We check your site with East Riding of Yorkshire Council’s rules before we design.

Grid connection: rural networks and export limits

Pocklington, Market Weighton and the villages are on Northern Powergrid’s Yorkshire network.

  • Smaller systems connect under G98: we install, then notify.
  • Larger ones, including most ground mounts and many battery systems, need G99 approval first. That typically adds 8–12 weeks. We prepare and manage the application.
  • Export limits on rural lines. Rural properties are often on long, single-phase lines, where the network may limit how much you can export. At Wapplington we fitted an export power manager, so the array could be larger than the export allowance and the surplus is used on site.

See our G99 guide.

Why BrightEdge

  • Local: Beverley-based, with installs at Wapplington, North Newbald and North Dalton
  • Ground-mount and in-roof experience, not just standard on-roof kits
  • Accredited: MCS certified (NIC-601602), RECC member, NICEIC, CHAS Elite
  • 24-month insurance-backed workmanship warranty
  • Straight answers on whether a battery or a ground mount is worth it for you
Aerial view of a 29 kWp ground-mounted solar array in a fenced paddock beside a barn conversion at Wapplington

FAQs: solar panels in Pocklington

Yes. We’ve installed a ground-mounted array at Wapplington near Pocklington and an in-roof system with a battery at North Newbald near Market Weighton. We cover both towns and the surrounding villages from Beverley.

Sometimes. Ground-mounted arrays have their own permitted development limits on size and position, and larger arrays need planning permission. We check your site before designing and prepare the information if an application is needed.

Not always, but it can be. A ground mount can face due south at the ideal angle and avoid shading, and it keeps character roofs clear. It costs more in mounting and cabling than a simple roof install, so we compare both for your site.

We design around it. An export power manager lets the system be larger than the export limit while the surplus is used on site, as at Wapplington. A battery can also store the surplus for later.

Yes. In-roof panels are ideal for new builds because they’re fitted with the roof. At North Newbald we installed a 9 kWp in-roof system with an 11.5 kWh battery on a new-build home.

Get a free solar survey

Tell us your address, whether you’re thinking of roof or ground, and send a recent electricity bill. We’ll come back with an initial layout and estimate, then arrange a survey.

Book a free survey · Call 01482 765063 · info@brightedgesolar.com

BrightEdge Solar Ltd, Colonial House, Swinemoor Lane, Beverley HU17 0LS. MCS certified (NIC-601602). RECC member.